Passivation and Plating for Etched Parts: What to Specify on the Drawing
An etched part is not finished when it leaves the etchant. The surface it comes out with decides whether it resists corrosion, takes solder, or simply looks like the part the buyer approved — and the finish is decided on the drawing, not at the end of the line. Xinketching is a precision photochemical etching manufacturer in Dongguan, China, producing flat etched metal parts since 2005. This guide sets out the two finishes buyers ask about most — passivation and plating — what each one does, when each one is the right call, and how to write the finish on the drawing so the quotation covers it.
Answer capsule: six things a buyer needs
- Passivation is the standard stainless finish. It restores the chromium oxide layer that etching disturbs, and it is done in-house on every stainless part.
- Plating is a specified finish, not a default. Tin, silver, nickel, gold or others on request — arranged through qualified partners, named on the drawing with its specification.
- Write the finish on the drawing. Finish, specification, and which surfaces it applies to — a finish left to assumption is the most common cause of a finish dispute.
- Finish does not rescue dimensions. Etch tolerance (±10% of thickness) and half-etch depth control (±0.05 mm) still govern; finish is a surface step after etching, not a correction for an out-of-tolerance part.
- Secondary work is quoted with the part. Mesh spot welding is in-house; stamping, colour filling and bending or forming are outsourced — name them on the drawing so the quotation covers them together.
- The commercial baseline is unchanged. Samples in 3–5 days, production in 7–10 days, no minimum order quantity, a US$100 minimum order charge, FOB — with a material test certificate and per-run batch traceability on every order.
Specifications
- Materials: stainless steel, copper, brass, nickel, titanium (we do not etch aluminium)
- Thickness range: 0.05–2.5 mm — gauges 0.05, 0.08, 0.1, 0.12, 0.15, 0.2, 0.25, 0.3, 0.4 and 0.5 mm are stocked; above 0.5 mm up to 2.5 mm is sourced per order
- Dimensional tolerance: ±10% of material thickness; raw-stock thickness tolerance ±0.02 mm
- Minimum through-features: ≈ material thickness (design rule ≈ 0.8–1.2× thickness)
- Half-etched features: ≈50–75% of thickness, depth control ±0.05 mm
- Format: flat sheets only, no coil/reel-to-reel; maximum single sheet 600 × 1,450 mm for material 0.5 mm and above; parts supplied flat, cut to outline or nested in the sheet
- Finishing: passivation in-house on stainless; plating of all types via qualified partners; mesh spot welding in-house
- Lead times and order terms: samples 3–5 days, production 7–10 days; no minimum order quantity, minimum order charge US$100; FOB
- Quality documents: material test certificate with per-run material batch traceability; PPAP Level 3 supported; IMDS data available; NDAs on request
What passivation does, and why it is standard on stainless
Etching removes metal, and in doing so it disturbs the chromium oxide layer that gives stainless steel its corrosion resistance. Passivation restores that layer. It is a chemical treatment, not a coating: nothing is added to the surface, so dimensions do not change and the part keeps the exact geometry etching produced. That is why passivation is part of the standard stainless flow here rather than an option to be requested — every stainless part is passivated in-house after etching, and the corrosion advantage the buyer specified the grade for stays real rather than theoretical. Our post on 301 vs 304 vs 316 sets out where each grade earns its premium; passivation is what protects that premium after the part is made.
When plating is the right call
Plating answers a different question from passivation: not “protect this surface” but “give this surface a property it does not have.” Solderability for a part that will be soldered, contact resistance for a part that carries current or signal, and appearance where the part is visible are the three usual reasons. Tin, silver, nickel, gold and other finishes are available on request, arranged through qualified partners — which means the finish specification travels with the drawing, not as an afterthought: name the finish, name the specification it must meet, and name the surfaces it applies to. A plating callout that says only “plated” cannot be quoted properly, because the finish, its thickness requirement and its coverage are all price- and process-driving facts. Where solderability or contact resistance is the reason, say so — the requirement behind the finish decides how it is checked.
How to write the finish on the drawing
Three items, on the drawing itself, not in an email thread. First, the finish: passivation, a named plating finish, or both, with the specification each must meet. Second, the coverage: all surfaces, or named surfaces only — a part that needs plating on its contact faces and nowhere else should say so, because selective coverage is a different job from all-over coverage. Third, any keep-out: areas where finish must not go, such as a bonding face or a masked region. A drawing that carries those three items gets a quotation that covers the finish; a drawing that carries only “finish as standard” gets a round of questions first. Our buyer’s guide lists the full drawing package; finish is one line of it, and it is the line most often left blank.
What finish does not change
Two numbers stay exactly where etching put them. Dimensional tolerance is still ±10% of material thickness — ±0.02 mm on 0.2 mm stock, ±0.05 mm on 0.5 mm stock — and half-etched depths are still held to ±0.05 mm. Finish is applied after etching and does not move those numbers, so it cannot rescue a part that is out of tolerance, and a quotation should never imply otherwise. Equally, finish does not change the feature rules: a through-feature still floors at roughly the material thickness, and a finish specification does not make an un-etchable hole etchable. Our post on photo etching tolerances works through both rules with examples. Judge a finish quotation on the finish — its specification, its coverage and its checking — not on dimensional promises the finish cannot keep.
Finishes and secondary operations, quoted together
A part that needs more than etching should arrive as one quotation, not three. Mesh spot welding is done in-house, so a mesh-and-frame assembly comes from one supplier. Plating is arranged through qualified partners, and secondary stamping, colour filling and bending or forming are outsourced — all quoted with the etched part when they are named on the drawing. That matters for the same reason the finish specification matters: a buyer comparing two quotations should be comparing the same scope. A quotation that is cheaper because it quietly dropped the plating or the forming step is not cheaper; it is a different part. Our post on how quotations work sets out how to line up the same basis before comparing numbers.
What we do not offer as a finish
Two boundaries, stated plainly. We do not apply fuel-cell coatings — a flow plate that needs a coated flow field belongs with a different process. And we do not supply brazed assemblies: we supply the etched plate or part itself, and sealing, bonding and brazed assembly are the customer’s own downstream steps. Both are worth stating at quotation rather than discovering after samples, and both are part of the same rule as everything above: the finish on the drawing should describe work we actually do.
FAQ
Is passivation included, or do I need to request it?
Included. Every stainless part is passivated in-house after etching as part of the standard flow.
Which plating finishes can I specify?
Tin, silver, nickel, gold and others on request, arranged through qualified partners. Name the finish and its specification on the drawing.
Does plating change the part dimensions or tolerance?
No. Dimensional tolerance stays ±10% of material thickness and half-etch depth control stays ±0.05 mm; finish is a surface step after etching.
Can I specify plating on only some surfaces?
Yes. Name the surfaces on the drawing, and any keep-out areas where finish must not go.
What if my part needs forming or colour filling as well?
Name it on the drawing. Those steps are outsourced secondary operations, quoted together with the etched part.
Send the drawing package
Xinketching etches flat precision parts in stainless steel, copper, brass, nickel and titanium from 0.05 to 2.5 mm, with samples in 3–5 days, production in 7–10 days, no minimum order quantity and a US$100 minimum order charge. Send the drawing package — including the finish specification described above — through our contact page or to sales@xinketching.com, and we will confirm feasibility and quote it as drawn.
- What Does a 770 W/cm² GPU Hotspot Mean for the Etched Copper Flow Layer? - November 22, 2026
- Photo-Etched Precision Medical Metal Components: Micro-Needles, Lancets and Microfluidic Parts - November 21, 2026
- Custom Lead Frame Etching for IC Packaging: Photo-Etched vs Stamped Lead Frames - November 18, 2026








