Xinketching etches lead frames in Dongguan for semiconductor, automotive-electronics and LED packages, working in copper alloys and stainless steel between 0.05 and 2.5 mm thick. Because the pattern is exposed photographically instead of punched through a die, frames hold a tolerance of ±10% of the sheet gauge, first samples leave in 3–5 days, and there is no minimum order quantity.
One product family on a full-range etching line
Lead frames are a single family among many on this floor. The same plant etches encoder discs, shielding cans, precision shims, fuel-cell plates and automotive mesh, at a rate of several million parts a month and up to 300 tonnes of material throughput. That breadth matters to frame buyers because a package programme seldom needs frames alone: the module around the device usually calls for a shield, a shim set or a sensor disc as well, and those parts can be quoted, produced and shipped together instead of being scattered across three suppliers. Etching in Dongguan since 2005, we run development frames, qualification lots and steady mid-volume supply from the same digital artwork.
Specifications
| Item | What we run |
|---|---|
| Materials | Copper alloys — H62 brass (UNS C27200) is the grade held as standard; further grades are bought in against the grade named on your drawing — plus stainless steel |
| Thickness | 0.05–2.5 mm overall; frame designs usually land between 0.1 and 0.5 mm |
| Dimensional tolerance | ±10% of the sheet gauge — 0.2 mm stock holds ±0.02 mm, 0.5 mm stock holds ±0.05 mm |
| Smallest features | Plan lead widths and the gaps between them at about the sheet thickness; the workable band runs 0.8–1.2× the gauge |
| Partial-depth features | Downsets and locking pockets etched down to 50–75% of the gauge, with depth held inside ±0.05 mm |
| Sheet format | Flat sheets only. The largest bed, 600 × 1,450 mm, is reserved for stock of 0.5 mm and above; finer gauges run on reduced panels so they stay flat |
| Finishes | Every plating type can be arranged through our finishing partners — nickel, tin, silver, gold and others; name the specification on the drawing |
| Ordering | No MOQ, replaced by a US$100 minimum order charge; FOB terms; samples 3–5 days, production runs 7–10 days |
Where etched frames earn their keep
- Automotive electronics — frames for ECU, sensor and driver packages that will be documented under PPAP
- Power conversion — frames for MOSFET, diode and rectifier devices going into drives, chargers and supplies
- LED — frames for lighting modules and vehicle lamp assemblies
- Industrial sensing — pressure, position and current-sensor packages
- Package development — qualification and bridge builds while a design is still changing, ahead of any decision on hard tooling
Design rules that keep a frame etchable
Pitch is bought with thinness. A lead or a gap cannot be reliably opened much below the thickness of the sheet it sits in, so a finer pitch almost always means stepping down a gauge. Check the tightest pitch on the drawing against the 0.8–1.2× band before the layout is frozen.
Keep half-etched floors inside their band. Downsets and pockets work between half and three-quarters of the gauge; push past roughly 75% and the remaining floor turns fragile and can break through. Depth on these features is controlled to ±0.05 mm.
Carry two tolerances, not one. The etching tolerance of ±10% governs the pattern. The sheet itself arrives with a thickness tolerance of ±0.02 mm, which belongs in your stack-up calculation separately — the two numbers describe different things.
Leave the outer rail working for you. A sound rail and tie-bar layout keeps a sheet of frames handling as one piece through plating and transport; flag any feature you intend to remove at singulation when you send the drawing.
Etching beside stamping
| Etching | Progressive stamping | |
|---|---|---|
| Up-front tooling | Artwork only | A die, with die cost and lead time |
| Changing the design | Redraw the artwork | Re-cut or rebuild the die |
| Natural home | Development, qualification, bridge and mid volumes | Frozen designs at very high volume |
Neither process wins everywhere; the table is how we advise buyers to sequence them.
Quality paperwork for regulated programmes
Automotive and industrial programmes can be supplied with PPAP Level 3 documentation, and IMDS material data can be provided. Every production run carries its material batch number and ships with a material test certificate, so a delivered lot traces back to the coil it came from. NDAs are signed whenever a customer asks, and drawings are used only for quoting and production.
Where etching is the wrong answer
A frozen frame design running into the tens of millions a year belongs on a die — unit cost will beat etching and we will say so. Frames drawn thicker than 2.5 mm are outside our range, and we do not etch aluminium in any thickness.
FAQ
Can a frame order travel with other etched parts?
Yes. Frames, shields, encoder discs, shims and mesh parts etched here can be covered by one enquiry and shipped together; send a drawing per part and the quotation will price them as a set while keeping each part’s specification separate.
Do you support PPAP and IMDS for automotive packages?
PPAP Level 3 submissions are available, IMDS material data sheets can be provided, and material test certificates with batch traceability accompany production runs as standard.
Which copper grade should our drawing call out?
Call out the grade your package design requires. H62 (UNS C27200) is the copper alloy we hold as standard; other grades are sourced per order to match the drawing, so naming the grade at enquiry stage lets us include material lead time in the quote.
What does a first order look like in cost and timing?
There is no minimum quantity; a US$100 minimum order charge applies instead. Samples typically take 3–5 days and production 7–10 days after approval, on FOB terms.
Our pitch is finer than the sheet thickness — what happens?
Two routes usually open up: step down to a thinner gauge so the pitch falls inside the workable band, or widen the tightest gaps in the layout. Send the drawing and we will mark every feature that sits below the reliable limit before quoting, rather than shipping marginal frames.
CTA: Send your drawings to sales@xinketching.com — Xinketching, Dongguan · since 2005 · xinketching.com · +86 17388801739

